onsemi AC/DC-Wandler 10 V THT, PDIP 7-Pin 9.37 x 6.6 x 3.43mm

Eingangsspannung max. = 10 V
Montage-Typ = THT
Pinanzahl = 7
Ausgangsstrom max. = 1.05A
Gehäusegröße = PDIP
Eingangsspannung Bereich = –0,3 → 10 V
Eingangsspannung min. = –0,3 V
Betriebstemperatur max. = +150 °C
Länge = 9.37mm
Breite = 6.6mm
Höhe = 3.43mm
Ausgangsstrom-Bereich = 1050 mA

The NCP1079A & NCP1079B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).Up to 30W output SMPS design capability Ability to scale for efficiency or size Adjust output current protection based on output power demand Eliminate acoustic noise Eliminate Aux winding Provides more robust protection without worrying about the coupling of the aux winding Improved efficiency at light load / Improved EMI over the entire load <50mW no Load Power Consumption Better EMI Signature Over the Entire Operating Range Enhanced Protection Against too Low or too High Input Voltage